The Autonerdz Community Forums - Preview files psdata

	Welcome, Guest. Please Login or Register

Home

Help

Member Map

Event Calendar

The Autonerdz Community Forums › General Public Area › PicoScope › Preview files psdata

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

Preview files psdata (Read 370 times)

LucaB Freshman Member Offline Posts: 10	Preview files psdata Oct 2^nd, 2013 at 10:04am Hello everyone and sorry for my bad English. I changed the PC for my Pico and I can not preview the file saved psdata. The PC now bears 7. Before okay with XP Who can help me? Best regards
Back to top	2013-10-01_134622.jpg (181 KB \| ) IP Logged

Tom Roberts Autonerdz Administrator Picogroup Offline Autonerdz Founder Posts: 8,598 Olympia Washington USA Gender:	Re: Preview files psdata Reply #1 - Oct 3^rd, 2013 at 8:01am I have been watching your thread on the Pico boards with interest....
Back to top	Tom Roberts Forums Administrator IP Logged

Andrew Phoenix

Senior Member
Picogroup

Offline

I'm an Autonerd

Posts: 107

Olympia
Washington
USA
Gender: male

Re: Preview files psdata
Reply #2 - Oct 3^rd, 2013 at 10:25am

Hi Luca,

I had the same issue on my Windows 7 machine here. I used the first command prompt that Mark B. posted on the Pico forums. Copy and pasting the code only caused an error that the .dll file could not be found. However, hand typing the command in worked.

This is what I used. (Ran as admin)

regsvr32 "c:\Program Files (x86)\Pico Technology\PicoScope6 Automotive\Thumbs\x64\Thumbs.dll"

Hope this helps,

Andrew

Have you tried turning it off and on again?

IP Logged

Tom Roberts

Autonerdz Administrator
Picogroup

Offline

Autonerdz Founder

Posts: 8,598

Olympia
Washington
USA
Gender: male

Re: Preview files psdata
Reply #3 - Oct 4^th, 2013 at 8:20am

The code on the Pico forums has a line break in it probably generated by the way the forums there handled the post..

Here is that discussion:

http://www.picoauto.com/support/topic9819.html

Here are the codes without the line breaks:

For 32 bit PCs:

regsvr32 "c:\Program Files\Pico Technology\PicoScope6 Automotive\Thumbs\x86\Thumbs.dll"

For 64 bit PCs:

regsvr32 "c:\Program Files (x86)\Pico Technology\PicoScope6 Automotive\Thumbs\x64\Thumbs.dll"

Just copy the appropriate code into the command prompt (run as admin). This fixes it. It restores the thumbnails and the right click context menu with the convert options.

Tom Roberts
Forums Administrator

IP Logged

LucaB Freshman Member Offline Posts: 10	Re: Preview files psdata Reply #4 - Oct 4^th, 2013 at 2:14pm Hi, I run command regsvr32 on Thumbs dll., everything works OK Many thanks for your help. You are very good Best regards Luca
Back to top	IP Logged

Tom Roberts Autonerdz Administrator Picogroup Offline Autonerdz Founder Posts: 8,598 Olympia Washington USA Gender:	Re: Preview files psdata Reply #5 - Oct 4^th, 2013 at 2:21pm LucaB wrote on Oct 4^th, 2013 at 2:14pm: You are very good All credit to Mark at Pico for this one.....
Back to top	Tom Roberts Forums Administrator IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page

Autonerdz forums