That is if I have my leads hooked up correctly. Let me know.

---

You're not gonna get a good capture testing that.

The coffee level is too low. Fill cup with coffee to fill line (top of picture) and retest.  ;)

Seany Mac wrote on Jul 15^th, 2019 at 9:41am:

Your not gonna get a good capture testing that. The coffee level is too low. Fill cup with coffee to fill line (top of picture) and retest.  ;)

How would one monitor it working to make the finished product. Gezzz...

I was being supervised!

---

Backpin the coffee grounds.
WPS in the dispenser.

You might need to use the PQ071 - Sight Block for visual confirmation... ;D

Seany Mac wrote on Jul 15^th, 2019 at 9:50am:

Backpin the coffee grounds.

That's where I had channel A and B to compare ground drop.



Seany Mac wrote on Jul 15^th, 2019 at 9:50am:

in the dispenser. You might need to use the PQ071 - Sight Block for visual confirmation... ;D

I was using Mick's sniffer but the PQ071 would probably work great for when he's not around.

Please put one on order! 

Is it at operating temperature?  ;D

Spence wrote on Jul 15^th, 2019 at 9:37am:

That is if I have my leads hooked up correctly. Let me know.

Is that a current coffee?

Logic wrote on Jul 15^th, 2019 at 4:50pm:

Spence wrote on Jul 15th, 2019 at 9:37am: That is if I have my leads hooked up correctly. Let me know. Is that a current coffee?

I about maxed out that clamp and may need a bigger amp clamp.  ;D

Spence wrote on Jul 15^th, 2019 at 5:03pm:

Logic wrote on Jul 15th, 2019 at 4:50pm: Spence wrote on Jul 15th, 2019 at 9:37am: That is if I have my leads hooked up correctly. Let me know. Is that a current coffee? I about maxed out that clamp and may need a bigger amp clamp.  ;D

Then maybe you should try "Maxwell House"

Logic wrote on Jul 15^th, 2019 at 5:23pm:

Spence wrote on Jul 15th, 2019 at 5:03pm: Logic wrote on Jul 15th, 2019 at 4:50pm: Spence wrote on Jul 15th, 2019 at 9:37am: That is if I have my leads hooked up correctly. Let me know. Is that a current coffee? I about maxed out that clamp and may need a bigger amp clamp.  ;D Then maybe you should try "Maxwell House"

That was Maxwell House. We could check the grounds   8-)

Lol,  ;D
Mick thinks your nuts Spence, lol.  And by that I mean Mick your Dog. ;)

I like the kind of coffee that takes the high amp probe! The low amp probe your using would melt  :D

That coffee is not well grounded. You might try using a better conductor at the base.

Also, hook up the scan tool and see the reading on the CTS (coffee temp sensor). These newer models tend not to start up if the temp is not reading right.

Measure, Measure, Measure.

---

Tom Roberts wrote on Jul 16^th, 2019 at 7:12am:

Measure, Measure, Measure.

Horizontal cursors?

[smiley=laughing2.gif]

Going to need a double shot of that after looking at Ian's spectrum analysis.

Nikk wrote on Jul 16^th, 2019 at 12:57pm:

Going to need a double shot of that after looking at Ian's spectrum analysis.

Would you prefer high amp or low?

Tom Roberts wrote on Jul 16^th, 2019 at 7:12am:

Measure, Measure, Measure.

Tom, you can skip the first step if you use kopi luwak coffee.

I have spent my life with German Shepherds...Mick is saying "You idiot if you spill that coffee in the Pico I will laugh at you forever, now get serious and get me some icecream...I like vanilla.

Spence wrote on Jul 16^th, 2019 at 1:56pm:

Would you prefer high amp or low?

Low amp please, I'm already wired enough as it is and I do want to sleep tonight.

This is one example of where no ground or grounds are acceptable.

Any codes?

Bevatron wrote on Jul 17^th, 2019 at 6:10pm:

Any codes?

---

Figures I don't own that scan tool...   :-/

Tom Roberts wrote on Jul 16^th, 2019 at 7:12am:

Measure, Measure, Measure

That's me in the morning, lol ;D

busjockey wrote on Jul 18^th, 2019 at 11:28am:

Tom Roberts wrote on Jul 16th, 2019 at 7:12am: Measure, Measure, Measure That's me in the morning, lol ;D

Show Off

[smiley=arms.gif]

Nikk wrote on Jul 18^th, 2019 at 2:34pm:

busjockey wrote on Jul 18th, 2019 at 11:28am: Tom Roberts wrote on Jul 16th, 2019 at 7:12am: Measure, Measure, Measure That's me in the morning, lol ;D Show Off [smiley=arms.gif]

Ahhh... What are wwe talking about here?   :o

Come on. You need to post your captures if you expect the professional guys on her to give up their valuable time helping you!

s4cs4c wrote on Aug 8^th, 2019 at 2:59pm:

Come on. You need to post your captures if you expect the professional guys on her to give up their valuable time helping you!

I'll grab a cup of coffee and see if I can find those captures.   8-)

I think it's an engineering problem.

---