| The Autonerdz Community Forums | |
|
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl
>> >> 2012 Kawasaki ER6N loss of power and stall https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1473065668 Message started by Anthony Lamb on Sep 5th, 2016 at 12:54am |
|
|
Title: 2012 Kawasaki ER6N loss of power and stall Post by Anthony Lamb on Sep 5th, 2016 at 12:54am
Scope not needed so much for diagnosing this on :D :'(
Turns out this is a common issue on these, I have heard of 2 others do the same thing around the 50k km mark. IMG_4697.JPG (86 KB | ) IMG_4696.JPG (82 KB | ) |
|
Title: Re: 2012 Kawasaki ER6N loss of power and stall Post by Mick on Sep 5th, 2016 at 6:04am Anthony Lamb wrote on Sep 5th, 2016 at 12:54am:
To late to use the scope is what I would say :D Does something like this happen whilst riding the bike? |
|
Title: Re: 2012 Kawasaki ER6N loss of power and stall Post by fisher on Sep 5th, 2016 at 8:17am
What is supposed to be the reason that these engines are prone to that failure? The combustion chamber looks like it is somewhat 'coked' up. Is it fuel injected and has Oxygen sensors?
|
|
Title: Re: 2012 Kawasaki ER6N loss of power and stall Post by Anthony Lamb on Sep 8th, 2016 at 11:58pm Mick wrote on Sep 5th, 2016 at 6:04am:
Only when doing naughty things ;) fisher wrote on Sep 5th, 2016 at 8:17am:
Valve pop out, found one had come out when I pulled the valve shim out fisher wrote on Sep 5th, 2016 at 8:17am:
Not as bad as it looks due to the lighting plus a lot of it is oil from the piston having a hole in it. Yep fuel injection and has single O2 heated sensor |
|
Title: Re: 2012 Kawasaki ER6N loss of power and stall Post by Mick on Sep 10th, 2016 at 11:28am Anthony Lamb wrote on Sep 8th, 2016 at 11:58pm:
Wouldn't want the crown jewels above or around one of those if it grenaded [smiley=chopper.gif] [smiley=evil.gif] |
|
Title: Re: 2012 Kawasaki ER6N loss of power and stall Post by StitchB on Dec 11th, 2016 at 6:14am Anthony Lamb wrote on Sep 8th, 2016 at 11:58pm:
2 funny, suspect it be true. StitchB |
|
The Autonerdz Community Forums » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |