The Autonerdz Community Forums

The Autonerdz Community Forums
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl >> >> Load Pro, Power Probe 4, test light diag https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1452455284 Message started by busjockey on Jan 10^th, 2016 at 11:48am

Title: Load Pro, Power Probe 4, test light diag
Post by busjockey on Jan 10^th, 2016 at 11:48am

Hey guys, here is a video I did diagnosing a problem on a air dryer heater circuit and showing how 3 different tools show drops in voltage, and brightness of the test lamp. Plus this is also kind of a mini Power Probe 4 review showing me use the feed test function. :)
https://youtu.be/UAT_DEi4xlo

Title: Re: Load Pro, Power Probe 4, test light diag
Post by top4 on Jan 14^th, 2016 at 2:47pm

Your video's are great can not weight for the next!
How about a few on bus 12V&24V system lay outs. and how they are wired and how you go about general troubleshooting best of luck Joe

Title: Re: Load Pro, Power Probe 4, test light diag
Post by busjockey on Jan 14^th, 2016 at 8:44pm

Thanks Joe. Yes I could do a video on how the 12 and 24 Volt system are laid out. Can't promise though when I will have it done. I have some other projects I am working on right now. :)