The Autonerdz Community Forums

The Autonerdz Community Forums
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl >> >> any autonerds in Cedar Fall IA? https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1437060904 Message started by Josh on Jul 16^th, 2015 at 7:35am

Title: any autonerds in Cedar Fall IA?
Post by Josh on Jul 16^th, 2015 at 7:35am

Looking for and autonerd in the cedar fall area.
I am in Livingston MT and have been working on a 2015 wayne engineering curbtender (garbage truck) that has ongoing intermittent problem. Talking with the factory they do not have a scope or captures but think it may be a good tool for them (after I explained what I could do with a pico scope but I needed to know more on how the system should send signals.

If anyone is in the cedar fall area with a scope let me know and the Jim at the factory may need some assistance from an autonerd.

Title: Re: any autonerds in Cedar Fall IA?
Post by busjockey on Jul 17^th, 2015 at 10:07am

Not from that area Josh but can you tell me what the problem is and what engine is in it? Post some stuff and I will help you out the best I can. :)

Title: Re: any autonerds in Cedar Fall IA?
Post by Josh on Jul 18^th, 2015 at 6:02am

loss of communication for a split second or maybe a minute on the wayne engineering curbtender arm control module.
my next step is to verify power to the module.

I ask the factory rep/head of teck about a scope capture and what we should have and he heard about scopes but has never had anyone hook one up to the system. After a brief discussion he look on line and realized that a scope would be a very usefull tool.