| The Autonerdz Community Forums | |
|
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl
General Public Area >> Autonerdz Site Issues >> psdata file https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1369930055 Message started by carguy on May 30th, 2013 at 8:07am |
|
|
Title: psdata file Post by carguy on May 30th, 2013 at 8:07am
cannot open a psdata file that has been download on form
do I need to have to download file to open it. Thanks, :-/ |
|
Title: Re: psdata file Post by Mick on May 30th, 2013 at 8:31am carguy wrote on May 30th, 2013 at 8:07am:
You need to update your version of Pico scope software. The file you downloaded was captured on a newer version than you have on your PC. |
|
Title: Re: psdata file Post by Tom Roberts on May 30th, 2013 at 8:53am
It's best to save the file and then open using PicoScope file/open. If you don't have hardware attached say yes to demo when prompted and then open the file.
You can choose to open the file directly if PicoScope is on the PC you are using but, if your hardware is not attached the settings values will be blank. If you cannot open the file, it may have been created with a newer PicoScope version than the one you are using and you will need to update. As a Picogroup member, you can get the latest Autonerdz custom build from our cloud (drop site). Feel free to call if you need assistance. |
|
The Autonerdz Community Forums » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |