The Autonerdz Community Forums

The Autonerdz Community Forums
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl General Public Area >> PicoScope >> Making Breakout Leads https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1349031418 Message started by fred on Sep 30^th, 2012 at 10:56am

Title: Making Breakout Leads
Post by fred on Sep 30^th, 2012 at 10:56am

Hello,

I am attempting to make a fuel injector breakout harness for 4 cylinder VW/Audi high pressure fuel injector testing.

I am looking for 4mm banana jacks that I can adapt with wire into my harness. Most of these from Pamona are far to large to fit with the Pico test leads.

I see these injectors peak at 90 volts so I don't want to get bit.

The Pico TA026 banana ends are perfect but quite expensive to buy and hack up. These banana jacks can not be more than .250" or 6.35 mm.

Thanks for helping,

Fred

Title: Re: Making Breakout Leads
Post by Bevatron on Sep 30^th, 2012 at 1:23pm

Hi Fred I think Testpath will have what you want.
http://www.testpath.com/Categories/Banana-Jacks-Banana-Plugs-2900.htm

Title: Re: Making Breakout Leads
Post by crackerclicker on Sep 30^th, 2012 at 3:19pm

Bevatron wrote on Sep 30^th, 2012 at 1:23pm:

I think Testpath will have what you want.

x2

just be careful when ordering online. the online catalog has mistakes every now and then regarding pricing or how many pieces come in a package.

Title: Re: Making Breakout Leads
Post by fisher on Sep 30^th, 2012 at 8:09pm

This stufff is high quality stuff...I dont know if they have what you want but you might like it for other purposes...
http://www.silvertronic.com/

Title: Re: Making Breakout Leads
Post by fred on Oct 1^st, 2012 at 6:31am

These!

http://www.testpath.com/Categories/Banana-Jacks-4mm-Shrouded-Straight-In-line-2912.htm

Thank-You so much, looked for a long time and ordered plenty of "wrong" ones.

Fred :D