The Autonerdz Community Forums

The Autonerdz Community Forums
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl General Public Area >> PicoScope >> waste spark https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1299604166 Message started by shay1 on Mar 8^th, 2011 at 9:09am

Title: waste spark
Post by shay1 on Mar 8^th, 2011 at 9:09am

Hi

I someone now how do i config the pico to look waste spark with 12 Channel Secondary Ignition?

I have pico 2 channel

Thanks
shay

Title: Re: waste spark
Post by Mick on Mar 8^th, 2011 at 9:47am

shay1 wrote on Mar 8^th, 2011 at 9:09am:

Hi

I someone now how do i config the pico to look waste spark with 12 Channel Secondary Ignition?

I have pico 2 channel

Thanks
shay

I am not sure what you are asking and maybe there is a typo in there (12)
Are you just wanting to see waste spark or do you want to see power and waste spark from one coil pack?

Mick

Title: Re: waste spark
Post by Randy H. on Mar 10^th, 2011 at 3:01pm

Mick - I think maybe he was talking about the mixmaster :-/- configuring the scope to look at the signals and ID number 1, and inverting the waste but not the power.

But, POOF shays gone - so we dont know what they were talking about! :)
They were probably using the built in test configurations, which I dont use.....because they arent so great in my opinion.....I always use my own settings with the sample rate to the roof

Title: Re: waste spark
Post by crackerclicker on Mar 10^th, 2011 at 3:37pm

shay,
here's a link to the mixmaster user manual:

http://www.picoauto.com/manuals.html?id=51

Title: Re: waste spark
Post by shay1 on Mar 11^th, 2011 at 10:53pm

Thanks to all
My question is: how do i config the pico to see waste spark with mixmaster 12 Channel Secondary Ignition and 2 channel pico scope?

Thanks
shay