The Autonerdz Community Forums

The Autonerdz Community Forums
https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl General Public Area >> PicoScope >> K110 Custom Probe https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?num=1294308847 Message started by Gadgetguy on Jan 6^th, 2011 at 2:14am

Title: K110 Custom Probe
Post by Gadgetguy on Jan 6^th, 2011 at 2:14am

Have tried to make a custom probe for the K110 but not sure if i have done this correctly.

I know that its not the best way of checking digital Mass Airflow Sensors but it was the easiest thing to compare with in the time i had free to try the K110 probe out.

Have attached the files on this post but not sure if i can attach the custom probe file on here or not but would be most gratefull if some body could check the settings on the custom probe and let me know if i have got it right or if not where i am going wrong.

Many Thanks :)

https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?action=downloadfile;file=Digital_MAF_test_with_K110_micro_probe.psdata (93 KB | )

https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?action=downloadfile;file=K110_Micro_Amp_Probe.psprobe (2 KB | )

untitled__Large_.JPG (101 KB | )

Title: Re: K110 Custom Probe
Post by Tom Roberts on Jan 6^th, 2011 at 1:54pm

Gadgetguy,

Not the way we did it, but that scaling will work.

The lookup table is not necessary and you have not set it up so you can edit the ranges within the probe. Neither of these affects the accuracy just the flexibility.

:exclamation Warning....sales pitch follows :exclamation

We have a tutorial on custom probe creation and management among others covering all aspects of PicoScope. The tutorial movie library is just one part of our support and training package for PicoScope automotive. This package is available by annual subscription with a discount for our overseas users. Contact me for details.

https://yabb.autonerdz.com/cgi/yabb2//YaBB.pl?action=downloadfile;file=supportblurb_001.pdf (35 KB | )

Title: Re: K110 Custom Probe
Post by Gadgetguy on Jan 7^th, 2011 at 3:03am

Thanks for the responce Tom,was aware of the support package and once my wallet has recoverd from christmas a years subscription is on the list along with a WPS500 to replace my FirstLook sensor.

Many Thanks once again :)

Title: Re: K110 Custom Probe
Post by Tom Roberts on Jan 7^th, 2011 at 9:05am

Check your email, Glen. I sent you another way of doing the K110 probe. ;)

Title: Re: K110 Custom Probe
Post by Gadgetguy on Jan 7^th, 2011 at 10:39am

Thank you very much Tom :)